• This email address is being protected from spambots. You need JavaScript enabled to view it.

Medium Fabric Structures

In terms of our LSAA Design Awards, a Medium sized Fabric Structure, or tensioned membrane structure, would have a surface area of between 250 and 1000 sqm.

Medium7
Medium6
Medium5
Medium4
Medium1
Medium2
Medium19
Medium18
Medium17
Medium16
Medium15
Medium14
Medium13
Medium12
Medium11
Medium10
Medium8
Medium9

Fabric or membrane structures of this size are often of one geometric form such as a conical structure with a central bale ring attached to a mast or tied down. The perimeter could be a series of edge cables, trusses or beams. If multiple units are used they the final structure may fall into the "large" category.

Other forms could be panels with internal diagonal arches, crossed arches, barrel vaults with intermediate valley cables.

The following articles are in random order whilst the List of Medium Structures is in order of most recently modified article first:

Verandah Cafe - Hamilton New Zealand
Verandah Cafe at Hamilton NZ

 

Entrant: Structurflex Ltd - Engineering Fabrication Installation
Location: Hamilton Lake Domain
Client: Hamilton City Council
Architect: 360 Architects
Struct. Eng.: Compusoft Engineering
Builder: Foster Construction
Fabricator: Structurflex

This project was entered in the LSAA 2009 Design Awards - Medium Structures (#2022)

No further details have been entered to date. 

LSAADA2009Cat2527
LSAADA2009Cat2526
LSAADA2009Cat2525
LSAADA2009Cat2524
LSAADA2009Cat2523
LSAADA2009Cat2522
LSAADA2009Cat2521
LSAADA2009Cat2520

Jakarta ETFE Canopy
Jakarta ETFE Canopy

 

Jakarta ETFE Canopy

Entrant: Fabritecture (Designer and Installer)

Location: Jakarta, Indonesia.   Completed: June 2015  Client: Leightons Asia
Team: Denton Corker Marshall, Maffeis Engineering, Fabritecture, Seele Covertex

Application: ‘Floating’ canopy suspended over a courtyard using a 2-layer ETFE cushion system, supported exclusively by stainless steel tie rods

This project was entered in the LSAA 2016 Design Awards (Medium Fabric Structures, 8128)

LSAADA2016Cat20175
LSAADA2016Cat20174
LSAADA2016Cat20173
LSAADA2016Cat20172
LSAADA2016Cat20171
LSAADA2016Cat20190
LSAADA2016Cat20189
LSAADA2016Cat20187
LSAADA2016Cat20188
LSAADA2016Cat20186
LSAADA2016Cat20185
LSAADA2016Cat20184
LSAADA2016Cat20183
LSAADA2016Cat20181
LSAADA2016Cat20182
LSAADA2016Cat20180
LSAADA2016Cat20179
LSAADA2016Cat20178
LSAADA2016Cat20177
LSAADA2016Cat20176

Hagley Oval from pitch
Hagley Oval from pitch

 

Project entered in the LSAA 2016 Design Awards (Medium Structures, #4047)

Entrant: Fabric Structure Systems (Designer / Fabricator / Installer)

Location: Christchurch, New Zealand.   Completed: October 2014  Client: Cantebury Cricket Association

Team: Athfield Architects, Wade Design Engineers Ltd, Southbase, Fabric Structure Systems 

Application: The establishment of an international venue at Hagley Oval for the 2015 cricket world cup and beyond. This required the construction of a new world class cricket pavilion, out of which an architectural fabric was chosen.

3-Hagley-view-along-seating
6-Hagley-SIDE
5-Hagley-Internal-Mast
4-Hagley-view-under-canopy-from-pitch
2-Hagley-long-view-to-canopy
1-Hagley-view-from-pitch-centre